*Optional*
- HighSides - Standard Kit 48" Long on Sides
- CargoDivider - 6" high, for 48" wide Deck Surface
- CargoGlide Short Bed Installation Kit.
1,500lbs Capacity
*Optional*
- CargoGlide Aluminum Bed Installation Kit
- Avalanche (No Drill) Installation Bracket Kit
- GooseNeck Option
Preassembled for 30-Minute Installation
*Optional*
- Aluminum tray up to 48" wide
- Steel tray Deck up to 48" wide
- Powdercoat one side of Metal CargoGlide Tray up to 48" wide
100% Extension
1,500lbs Capacity
Preassembled
CATEGORY:
CG XL Series
UNIT EXTENSION:
100%
LENGTH:
36" - 95"
DECK WIDTH:
24" - 48"
SIDE RAILS:
4" with 8" High Sides
WEIGHT:
345 - 430 lbs
CUSTOM SIZES AVAILABLE
A Cargoglide XL model is designed to roll 100% out the back of your vehicle. A Recessed Handle doesn't use any valuable storage space. 48" of deck clearance allows stowage of a sheet plywood. Side Thrust Bearings enable smooth operation when the vehicle is parked off-camber
Always check for clearances under the truck and van bed before drilling. Measure for tailgates with accessories and tailgates that do lay flat. The unit may need a spacer kit to clear the tailgate during operation.
MSRP: $2,872.00
Standard Specifications:
Aluminum, Steel and Diamond Plate Deck Available
1,500lbs Capacity
Preassembled for 30-Minute Installation
36 Cam Follower Needle and Sealed Ball Bearings
100% Extension
USA Steel Frame
Side Thrust Bearings for Smooth Operation While Vehicle is Tilted
Full Perimeter Tie Down Track
Industrial Laminated 3/4" Marine Grade Plywood
Heavy Duty Tie Downs Included
Standard Install Kit Included, (Aluminum bed install kit NOT included)
When ordering the CG1500XL or the CG2200XL with a low profile deck, the installer must check the clearance between the middle frame rail and the tail gate. Some truck tail gates do not lay flat. They lay tilted up enough that can cause binding when the unit is fully extended. Please measure the angle of the tail gate before ordering. If you order the CG1500XL or the CG2200XL with a standard height deck, then the tail gate is usually not an issue but we recommend checking the clearance between the middle frame rail and the tail gate in order to be sure of proper installation. If the tailgate collides with the CargoGlide, there two options to remedy the situation. One choice is to install "Tail Gate Drop Down Links" which CargoGlide sells as an accessory. However, not all trucks allow for this modification. The second choice is to install a "Spacer Kit" under the CargoGlide unit. The 'Spacer Kit" will raise the unit high enough to clear a tail gate that does NOT lay perfectly flat. Please request a spacer kit from your dealer.
2. How Many CargoGlide products have you sold in the last year?
0
1-5
5-10
10-20
20+
3. What could CargoGlide do to boost sales and help your business?
Provide more Support
Advertise on Social Media
Buys TV Ads for your area
Send you Leads
Provide a TV for your Showroom
Send you a Mini Display
Send you a full size unit to display to customers
4. What is the name of your Store?
5. What is First and Last name?
6. What is your Job Title?
7. What is the Current Address of your store?
8. What is the current phone number for your store?